Avast WEBforum

Consumer Products => Avast SecureLine VPN => Avast SecureLine VPN for Windows => Topic started by: REDACTED on October 11, 2017, 11:44:03 PM

Title: How to check if VPN is working?
Post by: REDACTED on October 11, 2017, 11:44:03 PM

Hi,

I have just purchased the Avast SecureLine VPN Multi-device.

I have no problem activating the VPN but how can I be sure that it actually works properly? Is there any way I can test it?

Best,

Spartanicos
 

Title: Re: How to check if VPN is working?
Post by: REDACTED on October 12, 2017, 03:40:09 AM

HOLA YO TENGO EL MISMO PROBLEMA INSTALE LA COMPRA QUE HICE POR DOS AÑOS, COMENSO HACE DOS MESES PERO PARECE QUE ESTA TOTALMENTE DESPROTEGIDA MI PC Y NO VEO COMO COMUNICARSE CON LA EMPRESA AVAST, ASI QUE VI TU COMENTARIO Y PENSE TE DIERON RESPUESTA, SIGO SIN SABER COMO HACER.

Title: Re: How to check if VPN is working?
Post by: Asyn on October 12, 2017, 05:54:39 AM

Please post English here, else use the forum section for your language.
-> https://forum.avast.com/index.php?board=21.0

Title: Re: How to check if VPN is working?
Post by: Eddy on October 12, 2017, 01:46:04 PM

spartanicos

What is it you want to check ?
You can check the IP from the outside, monitor the data traffic and such.

Title: Re: How to check if VPN is working?
Post by: REDACTED on October 12, 2017, 02:13:38 PM

У меня не. Работает пишут сервис не доступен пачему

Title: Re: How to check if VPN is working?
Post by: Eddy on October 12, 2017, 02:51:40 PM

This is a ENGLISH forum !

Title: Re: How to check if VPN is working?
Post by: REDACTED on November 25, 2017, 06:59:56 PM

Hi.

   Before activate Secure Line VPN open a command screen (cmd.exe) and type "netstat". You will see all active connections where local IP address will be your unprotected IP. So, activate the VPN, wait some minutes to close and reopen all conections, and repeat the process. Now you will see all connections with another IP address (VPN IP address).

Best,

Ivan

Title: Re: How to check if VPN is working?
Post by: REDACTED on December 05, 2017, 12:30:32 PM

Quote from: Ivan_Schiessl on November 25, 2017, 06:59:56 PM

Hi.

   Before activate Secure Line VPN open a command screen (cmd.exe) and type "netstat". You will see all active connections where local IP address will be your unprotected IP. So, activate the VPN, wait some minutes to close and reopen all conections, and repeat the process. Now you will see all connections with another IP address (VPN IP address).

Best,

Ivan

very good information, thank you ! - after typing "netstat" it starts showing IP addresses , but after few seconds this information disapear and I can not take note or read carefully ... any idea what to do ? ...taking photo ? ... best , rene118