Author Topic: after avast home installation: cannot acces neither internet nor LAN  (Read 24586 times)

0 Members and 1 Guest are viewing this topic.

yvhanoi

  • Guest
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #30 on: January 26, 2005, 09:18:14 AM »
another precision:

i have also tried to set up Startup Delayer to defer AVAST when restarting the laptop (120s).
what i have seen so far is that before AVAST is running, i already get a dummy IP @.
so my assumption is that the problem is not AVAST running but AVAST installation itself.
does anybody what is done at installation time (registry update...) ?

Offline Lisandro

  • Avast team
  • Certainly Bot
  • *
  • Posts: 67241
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #31 on: January 26, 2005, 11:35:59 AM »
So my assumption is that the problem is not AVAST running but AVAST installation itself.
does anybody what is done at installation time (registry update...) ?

Very strange... avast does not change IP address, does it?
avast can't interfere at this point...
I suppose that you already repaired your installation (Control Panel > Add/Remove programs > avast! antivirus > Remove
Then choose Repair function in the popup window)...
The best things in life are free.

Offline Eddy

  • Avast Evangelist
  • Maybe Bot
  • ***
  • Posts: 31216
  • Watching (over?) you
    • Malware removal, Biljart and other things.
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #32 on: January 26, 2005, 03:53:14 PM »
I've seen it twice in that the router software didn't work with a certain application. Very rare, but it did happen.
Heva you already contacted the manufacturer to see what they say about this?

whenever

  • Guest
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #33 on: March 05, 2005, 04:50:21 PM »
I have the same problem with yvhanoi.

When avast disabled, the wireless connection is OK.

When avast enabled, it is very difficult to connect to the wireless router although it shows a wireless network is in range. Sometimes it can connect after I plug in and out the PCMCIA Card many times.

It seems there is a conflict between avast and linksys driver, because when avast enabled, the STATE in the attached pic shows:
"Can not communicate with device driver."

Offline Lisandro

  • Avast team
  • Certainly Bot
  • *
  • Posts: 67241
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #34 on: March 05, 2005, 07:43:16 PM »
Whenever, welcome, if you don't mind the off topic, I could not resist:
Which program did you use to 'shred' the screen shot above?
The best things in life are free.

Offline DavidR

  • Avast √úberevangelist
  • Certainly Bot
  • *****
  • Posts: 86651
  • No support PMs thanks
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #35 on: March 05, 2005, 07:55:36 PM »
I'm trying the SnagIt trial version, it looks a litle like that, but probably not.
Windows 10 Home 64bit/ Acer Aspire F15/ Intel Core i5 7200U 2.5GHz, 8GB DDR4 memory, 256GB SSD, 1TB HDD/ avast! free 22.5.6015 (build 22.5.7263.730) UI 1.0.711/ Firefox, uBlock Origin, uMatrix/ MailWasher Pro/ Avast! Mobile Security

whenever

  • Guest
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #36 on: March 06, 2005, 08:28:00 AM »
Whenever, welcome, if you don't mind the off topic, I could not resist:
Which program did you use to 'shred' the screen shot above?
I am using SPX Instant Screen Capture. Very easy and handy.
http://www.moodysoft.com/spx/

Offline Lisandro

  • Avast team
  • Certainly Bot
  • *
  • Posts: 67241
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #37 on: March 06, 2005, 04:20:14 PM »
Thanks whenever. Unfortunatelly, it's not a freeware  :'(
The best things in life are free.

Offline DavidR

  • Avast √úberevangelist
  • Certainly Bot
  • *****
  • Posts: 86651
  • No support PMs thanks
Re: after avast home installation: cannot acces neither internet nor LAN
« Reply #38 on: March 06, 2005, 06:09:55 PM »
Thanks whenever. Unfortunately, it's not a freeware :'(
That's right neither are freeware, but it does save a lot of time, rather than capture an image and then have to edit it using a graphics editor.

I too liked the ScreenPrint32 (freeware) that you recommended to me some time ago, it is limited in what it can do. Having used SnadIt for just over a week, the cost Vs convenience is in favour of a one off payment.

When I complete my 30 day trial, I will try the SPX Instant Screen Capture and decide which to go for. The SPX is a little less costly, but I think that SnagIt has a few options not available in SPX, the decision is are they worth the extra cost.
Windows 10 Home 64bit/ Acer Aspire F15/ Intel Core i5 7200U 2.5GHz, 8GB DDR4 memory, 256GB SSD, 1TB HDD/ avast! free 22.5.6015 (build 22.5.7263.730) UI 1.0.711/ Firefox, uBlock Origin, uMatrix/ MailWasher Pro/ Avast! Mobile Security