Author Topic: Started with the "no endpoints" error message when trying to scan....  (Read 2879 times)

0 Members and 1 Guest are viewing this topic.

REDACTED

  • Guest
Hi all,

So after several failed attempts to scan and beating my head against the wall, I uninstalled and reinstalled to no avail. I've been looking around and I have no idea where to go from here.  >:( I found the "Logs to assist in cleaning malware" thread and followed the directions. Here are my logs.

Thanks in advance for any help

Offline essexboy

  • Malware removal instructor
  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 40589
  • Dragons by Sasha
    • Malware fixes
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #1 on: March 04, 2015, 12:07:15 PM »
Is that MBAM premium that you have ?

Temporarily uninstall MBAM

Download Avast Uninstall Utility to your Desktop.
Download the correct version of Avast 
Avast Free
Avast Pro
Avast Internet Security
Avast Premier
Disconnect from the net
Uninstall Avast via control panel

  • Run the uninstall tool and accept the reboot to safe mode
  • Once complete reboot your system
  • Reinstall Avast
----------

REDACTED

  • Guest
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #2 on: March 04, 2015, 04:42:57 PM »
MBAM was the trial. In my googling, somebody at some had said to enable the trial(not on the Avast thread). Anyway, I uninstalled it.

So in this order, I:

Disconnected from the internet.
Uninstalled Avast.
Ran the utility.
Accepted safe mode.
Rebooted.
Reinstalled Avast.

Upon installation, Avast ran and completed the quick scan and opened the "Select your level of protection" window and is now frozen. I cannot click on anything in the window as I just get a "bwong" Windows 8 sound. I cannot get rid of the window...the only way is to restart. My computer is not frozen but I can't click on anything Avast. Even when I get the notification that "there are important updates to install to some of your software", I click on it it, the window comes up, and is frozen. Nothing can be updated. ???

Offline essexboy

  • Malware removal instructor
  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 40589
  • Dragons by Sasha
    • Malware fixes
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #3 on: March 04, 2015, 04:55:47 PM »
OK go to control panel > programmes and features
Select Avast
Select Change
Select Continue
Remove the tick from Secure virtual machines
Click continue and allow Avast to do its thing
Reboot on completion


REDACTED

  • Guest
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #4 on: March 04, 2015, 06:48:51 PM »
Did that, and restarted....same result

Offline essexboy

  • Malware removal instructor
  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 40589
  • Dragons by Sasha
    • Malware fixes
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #5 on: March 04, 2015, 07:17:21 PM »
OK lets see if there is a conflict somewhere

This is a clean boot where we will initially just run MS services and Avast

In the search box type Msconfig and select the programme that appears at the top

1.In the System Configuration Utility dialog box, click Selective Startup on the General tab.

2.Click to clear the Load Startup Items check box.
NoteThe Use Original Boot.ini check box is unavailable.
3.Click the Services tab.
4.Click to select the Hide All Microsoft Services check box.

5.Click Disable All, and then tick any Avast related services
6.Click OK.
7.When you are prompted, click Restart.
8.Now try an Avast quick scan

REDACTED

  • Guest
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #6 on: March 04, 2015, 10:53:11 PM »
I can scan now.  :)

Offline essexboy

  • Malware removal instructor
  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 40589
  • Dragons by Sasha
    • Malware fixes
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #7 on: March 04, 2015, 11:04:59 PM »
OK that indicates a conflict with one of the services.

Is the system running OK with the other services disabled ?

REDACTED

  • Guest
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #8 on: March 05, 2015, 09:03:12 AM »
OK Essexboy, here's the deal:

After I was able to do a quick scan, I went ahead and scheduled a boot time scan so my apologies for the delayed response(found 34 threats btw). The system was running fine with everything disable so I went through all of the services until I found the conflict. As it turns out, a program called Synergy was causing the issue. I was able to run everything as normal with all services and startup items until I enabled the Synergy service(netwrok based keyboard mouse sharing software). I'm assuming that the last update from them was the problem so I'm going to contact them for feedback. I appreciate your direction in figuring this out as it was really getting on my nerves. You da man!!!  8)

For anyone else out there running Synergy with Avast Free, you may want to try and run a scan and see if it works for you. If not, try disabling the service. I'm running Synergy version 1.6.2

Thanks again,
Joe
« Last Edit: March 05, 2015, 09:07:03 AM by jfabian77 »

Offline essexboy

  • Malware removal instructor
  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 40589
  • Dragons by Sasha
    • Malware fixes
Re: Started with the "no endpoints" error message when trying to scan....
« Reply #9 on: March 05, 2015, 12:38:23 PM »
Were the threats adware ?

Glad all is well now :)