Author Topic: Using Smart View software with Samsung Smart TV  (Read 6097 times)

0 Members and 1 Guest are viewing this topic.

Offline cigarshaped

  • Newbie
  • *
  • Posts: 2
Using Smart View software with Samsung Smart TV
« on: July 29, 2015, 09:57:01 PM »
Simple request. How to enable me access between windows PC and new Samsung TV, using Smart View 2.0 software. As far as we can see Avast Firewall is preventing access either way. It is really annoying and I want the easy answer! I have wired network through a new Virgin router. 

Offline Pondus

  • Probably Bot
  • ****
  • Posts: 36730
Re: Using Smart View software with Samsung Smart TV
« Reply #1 on: July 29, 2015, 10:07:49 PM »
Quote
It is really annoying and I want the easy answer!
Turn off avast firewall .... i assume your router has a firewall?


« Last Edit: July 29, 2015, 10:11:14 PM by Pondus »

Offline cigarshaped

  • Newbie
  • *
  • Posts: 2
Re: Using Smart View software with Samsung Smart TV
« Reply #2 on: July 30, 2015, 12:21:58 AM »
Getting somewhere with Avast Firewall OFF. No pictures yet, but it knows what channel, at least.
Virgin firewall may not be ideal for normal protection on its own though?

Offline kkeonline

  • Newbie
  • *
  • Posts: 3
Re: Using Smart View software with Samsung Smart TV
« Reply #3 on: June 14, 2016, 03:02:55 PM »
Simple request. How to enable me access between windows PC and new Samsung TV, using Smart View 2.0 software. As far as we can see Avast Firewall is preventing access either way. It is really annoying and I want the easy answer! I have wired network through a new Virgin router.

any answer to the problem?
I just got samsung smart TV and got the same problem using smart view on windows
The app cannot detect TV unless turnoff avast firewall
checking firewall log it say block UDP in (app = "system"), but I can't find the way to allow this UDP traffic
In the application rules already select "system" and allow all connection but still can not detect TV unless turn the firewall off

Offline kkeonline

  • Newbie
  • *
  • Posts: 3
Re: Using Smart View software with Samsung Smart TV
« Reply #4 on: June 14, 2016, 03:17:54 PM »
finally I solved the problem.

Open firewall settings / Packet rules / add new rule as shown

http://upic.me/i/e3/2016-06-14_201221.png


Edit: this is not permanent solution because the port is randomly change after reopen the smart view

so I fix the IP address to samsung TV and allow all UDP from that IP

http://upic.me/i/ms/2016-06-14_202616.png
« Last Edit: June 14, 2016, 03:31:43 PM by kkeonline »