Author Topic: Firewall block all local IP adress: 192.168.1.* After updating  (Read 23588 times)

0 Members and 1 Guest are viewing this topic.

Offline oktup

  • Newbie
  • *
  • Posts: 4
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #45 on: May 01, 2017, 12:48:44 PM »
Just back from being away for a couple of weeks, and found Avast was preventing access to my Synology NAS. Tried the recommended solutions above (eg repair avast; disable port blocking etc) and no luck (I presume I was doing this after Avast applied the micro-update).

After a lot of trial and error, I can connect to the NAS is I set "Allow DNS" to "disabled" in the Packet Rules/System Rules - after that, it all works fine. However....I then can't connect to any other website as the DNS lookup doesn't work (and have to reset "Allow DNS" to "enabled" to browse the web).

Not sure what to try next on this?

oktup

Offline Asyn

  • Avast √úberevangelist
  • Certainly Bot
  • *****
  • Posts: 66767
    • >>>  Avast Forum - Deutschsprachiger Bereich  <<<
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #46 on: May 01, 2017, 12:51:56 PM »
You could try the latest beta: https://forum.avast.com/index.php?board=15
Win 8.1 [x64] - Avast PremSec 20.8.2427.B#2 [UI.560] - CC 5.71 - EEK - FF ESR 68.12 [NS/AOS/uBO/PB] - TB 68.12 - SB/CP/SL/DU.BC
Deutschsprachiger Bereich -> Avast Wissenswertes (Downloads, Anleitungen & Infos): https://forum.avast.com/index.php?topic=60523.0

Offline sean33

  • Newbie
  • *
  • Posts: 6
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #47 on: May 02, 2017, 02:43:47 AM »
Try to get it to update, manually check for updates, restart and check again.  And disable port scanning.  Some of the features came back, and are gone again, like being able to tell Avast to allow all local traffic.  So now I see mine says allow all applications that don't have a rule.  Whatever.

Offline cloullin

  • Newbie
  • *
  • Posts: 4
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #48 on: May 13, 2017, 01:03:54 PM »
I'm on program version v17.4.2294 in the meantime but still no improvement.

Offline mchain

  • Avast Evangelist
  • Ultra Poster
  • ***
  • Posts: 5416
  • Spartan Warrior
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #49 on: May 13, 2017, 08:47:11 PM »
I'm on program version v17.4.2294 in the meantime but still no improvement.
Are you running avast free?
Windows 10 Home 64-bit 1909 Avast Premier Security version 20.1.2397 (build 20.1.5069.559) UI version 1.0.460.

Offline cloullin

  • Newbie
  • *
  • Posts: 4
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #50 on: May 16, 2017, 10:01:26 PM »
I'm on program version v17.4.2294 in the meantime but still no improvement.
Are you running avast free?
Yes

Offline Eddy

  • Avast Evangelist
  • Maybe Bot
  • ***
  • Posts: 31345
  • Watching (over?) you
    • Malware removal, Biljart and other things.
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #51 on: May 16, 2017, 10:14:41 PM »
Did you perform a clean installation of avast ?

Offline bob3160

  • Avast √úberevangelist
  • Probably Bot
  • *****
  • Posts: 44111
  • 60 Years of Happiness
    • bob3160 Protecting Yourself, Your Computer and, Your Identity
Re: Firewall block all local IP adress: 192.168.1.* After updating
« Reply #52 on: May 16, 2017, 10:56:25 PM »
I'm on program version v17.4.2294 in the meantime but still no improvement.
Are you running avast free?
Yes
The free version of Avast doesn't have a firewall.

Clean Install of Avast:
https://goo.gl/4Ptzkf
Free avast! Security Seminar: http://bit.ly/2N1eaR2  -  Important: http://www.organdonor.gov/ -- My Web Site: http://bob3160.strikingly.com/ - Win 10 Pro v1909 64bit, 24 Gig Ram, 1TB SSD, AvastOmni 20.7.xxx, How to Successfully Install Avast http://goo.gl/VLXdeRepair & Clean Install https://goo.gl/t7aJGq