Author Topic: Boot-Time Scan: installing specialised definitions does not terminate  (Read 2776 times)

0 Members and 1 Guest are viewing this topic.

Offline bundy2

  • Newbie
  • *
  • Posts: 9
Before you run a boot-time scan, you are advised to install specialised definitions. If you click the button to do this, a horizontal line moves back and forth, presumably to indicate that these definitions are being installed. I've tried to do this on two computers this weekend: an HP laptop and a Dell desktop. In both cases, the line was still moving many hours later - in fact, for most of the day. It's hard to believe it could really take this long. In the end I gave up waiting and just did the boot-time scan anyway, which in both cases found problems. But the suspicion remains that it might have found more problems if the definition installation had terminated.

What is going on here? Does it really take more than a day to install these specialised definitions? Or, more likely, I suspect, was it stuck in some loop or just stuck doing nothing. Is there a fix?

Offline Pondus

  • Probably Bot
  • ****
  • Posts: 37507
  • Not a avast user
Re: Boot-Time Scan: installing specialised definitions does not terminate
« Reply #1 on: February 24, 2019, 11:49:54 AM »
Quote
But the suspicion remains that it might have found more problems if the definition installation had terminated.
Have you run a full scan with PUP detection (default off)


Quote
which in both cases found problems.
What was found ... PUPs ?



Offline Asyn

  • Avast Überevangelist
  • Certainly Bot
  • *****
  • Posts: 76037
    • >>>  Avast Forum - Deutschsprachiger Bereich  <<<
Re: Boot-Time Scan: installing specialised definitions does not terminate
« Reply #2 on: February 24, 2019, 01:23:10 PM »
Before you run a boot-time scan, you are advised to install specialised definitions. If you click the button to do this, a horizontal line moves back and forth, presumably to indicate that these definitions are being installed. I've tried to do this on two computers this weekend: an HP laptop and a Dell desktop. In both cases, the line was still moving many hours later - in fact, for most of the day. It's hard to believe it could really take this long. In the end I gave up waiting and just did the boot-time scan anyway, which in both cases found problems. But the suspicion remains that it might have found more problems if the definition installation had terminated.

What is going on here? Does it really take more than a day to install these specialised definitions? Or, more likely, I suspect, was it stuck in some loop or just stuck doing nothing. Is there a fix?
Hi, see: https://forum.avast.com/index.php?topic=225321.0
W8.1 [x64] - Avast Free AV 23.3.8047.BC [UI.757] - Firefox ESR 102.9 [NS/uBO/PB] - Thunderbird 102.9.1
Avast-Tools: Secure Browser 109.0 - Cleanup 23.1 - SecureLine 5.18 - DriverUpdater 23.1 - CCleaner 6.01
Avast Wissenswertes (Downloads, Anleitungen & Infos): https://forum.avast.com/index.php?topic=60523.0