Ok,make a boot floppy (Add/Remove Programs,you'll find option to make bootable floppy there),than you have to set boot sequence in BIOS to something like this (you can get to BIOS by holding DEL key at boot time):
FLOPPY
IDE
CD-ROM
(This is usually under Advanced Settings or something similar)
Than insert bootable floppy into drive and start the machine.
You'll get multiple options after some time and select:
Run without CD-ROM support (something like this,i haven't used these floppies for years coz im on NTFS).
Ok now you have black screen with white letters on it
In the line where a line is flashing you should have
C:\.
If you have
A:\ than just type
C: and press [ENTER].
Now type in
dir restore or if it doesn't work,try
dir _restore and press [ENTER].
Type
dir temp and press [ENTER].
Now its time to dele some nasty files...
Type in
del *.* and press [ENTER].
WARNINGMake sure your path in front of
del command looks like:
C:\_restore\temp\!!!! Its very important so you won't delete good data!
You'll be prompted to confirm deletion. Select Y as YES.
It might take a long time to delete all temp files.
After its done,restart the machine and set the boot sequence back to default and take out that boot floppy.
Start Windows normally...