Author Topic: Version: 19.3.2369 (Mar 2019)  (Read 22851 times)

0 Members and 1 Guest are viewing this topic.

Offline Boris17

  • Newbie
  • *
  • Posts: 3
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #45 on: March 13, 2019, 11:49:22 AM »
When you install the checkbox for blocking sites, any sites typed in the address bar of the browser are blocked.

Offline jds776162

  • Newbie
  • *
  • Posts: 3
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #46 on: March 13, 2019, 08:51:53 PM »
Can not choose bootscan in traditional Chinese version,it does not show up!!

Offline noelrojasc

  • Sr. Member
  • ****
  • Posts: 234
  • Usuario desde la versión 5
Re: NEW Version: 19.3.2369 (Mar 2018)
« Reply #47 on: March 13, 2019, 09:03:16 PM »
Hi,

Thanks for the new release. Installed over the beta and rebooted. So far so good. I am on Windows 10 insider release 18353 64bit.

On smartscan, I noticed there is no new interface where we see the files being scanned. I am sure it was in the beta of the same version. Am I missing something?

The new flow is now turned on in beta, on production we will first start in selected countries and measure the impact first..

Could you please tell us which are those selected countries, and when the new UI will be available for all countries? Thank You.
DELL Optiplex 790, Intel Core i5, 16GB RAM, Windows 10 Pro 64 Bits, Avast Free.

Offline Simon234

  • Jr. Member
  • **
  • Posts: 25
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #48 on: March 13, 2019, 10:23:55 PM »
Custom virus scan with shutdown after is not working. Came home and pc was still on and running. FAIL

Offline bob3160

  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 43867
  • 60 Years of Happiness
    • bob3160 Protecting Yourself, Your Computer and, Your Identity
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #49 on: March 13, 2019, 10:35:32 PM »
Custom virus scan with shutdown after is not working. Came home and pc was still on and running. FAIL
Already reported to Avast.

Free avast! Security Seminar: http://bit.ly/2N1eaR2  -  Important: http://www.organdonor.gov/ -- My Web Site: http://bob3160.strikingly.com/ - Win 10 Pro v1909 64bit, 24 Gig Ram, 1TB SSD, AvastOmni 20.3.xxx, How to Successfully Install Avast http://goo.gl/VLXdeRepair & Clean Install https://goo.gl/t7aJGq

Offline jds776162

  • Newbie
  • *
  • Posts: 3
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #50 on: March 14, 2019, 10:05:10 PM »
Can not choose bootscan in traditional Chinese version,it does not show up!!

I solve it by install the forum version instead of Avast support website version.

But now have a new problem, Behavior protection report does not record start and end time of service.

Offline steens

  • Newbie
  • *
  • Posts: 8
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #51 on: March 15, 2019, 01:35:07 AM »
I found a bug with Avast Free 19.3.2369, shields only install, Win 8.1. Previous 19.1.2360 uninstalled & full offline clean install 19.3.2369.

When typing chkdsk c: /f /x in elevated cmd (or powershell), on reboot autochk doesn't run. Confirmed via event viewer boot logs, no wininit executed on boot. Reboot shows press key to abort scanning, then gets to scanning but proceeds directly to windows boot. Never shows "scanning and repairing drive (c): xx% complete." Reverted to 19.1.2360 executes correctly again. Haven't tried 19.2.2364. Initially I though it was probably the March kb4489881 patch...
« Last Edit: March 15, 2019, 01:57:24 AM by steens »

Offline smokedawg1281

  • Newbie
  • *
  • Posts: 4
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #52 on: March 15, 2019, 04:18:29 AM »
Custom scans do not ummm scan.  I have a custom scan set to run a smart scan daily at 5:00am and I clicked the option to generate the report file.  This scan has been in place for 2 days.  No scans have been completed at all.  Am I even protected???  What else did this update break...
Running Windows 8.1 64 bit.  Latest version of Avast was a fresh install to rid myself of the BSOD caused from the previous update.
This is getting quite frustrating!!!!!

Offline mchain

  • Avast Evangelist
  • Ultra Poster
  • ***
  • Posts: 5416
  • Spartan Warrior
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #53 on: March 15, 2019, 05:18:56 AM »
@ smokedawg1281,

If you want to see if avast is protecting you try the following links:  All test links trigger real-time avast defenses which automatically protect you.
https://www.amtso.org/security-features-check/
Use the Desktop solution if you are running a laptop or desktop.  None of the 6 tests will harm your system.  Report back.
(Some links will take about 15-20 seconds to trigger an active avast block, so give it a little time)

If you would rather not, then do a Repair of Avast followed by a reboot.  See attached below:  (Click Repair to begin)
Windows 10 Home 64-bit 1909 Avast Premier Security version 20.1.2397 (build 20.1.5069.559) UI version 1.0.460.

Offline smokedawg1281

  • Newbie
  • *
  • Posts: 4
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #54 on: March 15, 2019, 08:54:31 PM »
@mchain
Thank you very much.  I'll check those out.  Somehow, after deleting the scan and creating a new custom scan, it worked this morning and I got the report afterwards.  I'll still check out those links.

Offline bob3160

  • Avast Überevangelist
  • Probably Bot
  • *****
  • Posts: 43867
  • 60 Years of Happiness
    • bob3160 Protecting Yourself, Your Computer and, Your Identity
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #55 on: March 15, 2019, 10:42:17 PM »
Since this update, the following has returned:

It occurs on a random, unexpected basis. Not on every boot.
Free avast! Security Seminar: http://bit.ly/2N1eaR2  -  Important: http://www.organdonor.gov/ -- My Web Site: http://bob3160.strikingly.com/ - Win 10 Pro v1909 64bit, 24 Gig Ram, 1TB SSD, AvastOmni 20.3.xxx, How to Successfully Install Avast http://goo.gl/VLXdeRepair & Clean Install https://goo.gl/t7aJGq

Online lcc

  • Newbie
  • *
  • Posts: 8
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #56 on: March 17, 2019, 01:13:54 AM »
Hi! There is third version with 2 AV launch component in Windows start up. Are you going to fix it?

Offline babyblues409

  • Newbie
  • *
  • Posts: 4
Re: NEW Version: 19.3.2369 (Mar 2019) - ScanDisk Errors Off due to update
« Reply #57 on: March 17, 2019, 09:48:19 PM »
This new version has bricked the Windows ScanDisk program causing it to error off. I have tried it on many Windows 7 PRO Optiplex 3020, 7020, etc machines with both conventional and SSD drives and NONE will run. It took me a while to isolate the program that did it and it is this new Avast Free update.

Just try running ScanDisk and you will see what I mean...

Please fix it. I love Avast and have run it years and recommended it to many many people over the years who are still running it today.

Thanks for a great product!
« Last Edit: March 17, 2019, 11:46:15 PM by babyblues409 »

Offline Asyn

  • Avast Überevangelist
  • Certainly Bot
  • *****
  • Posts: 65998
    • >>>  Avast Forum - Deutschsprachiger Bereich  <<<
Win 8.1 [x64] - Avast PremSec 20.7.2421.B#1 [UI.544] - CC 5.70 - EEK - FF ESR 68.11 [NS/AOS/uBO/PB] - TB 68.11 - SB/CP/SL/DU.BC
Deutschsprachiger Bereich -> Avast Wissenswertes (Downloads, Anleitungen & Infos): https://forum.avast.com/index.php?topic=60523.0

Offline JF17

  • Newbie
  • *
  • Posts: 1
Re: NEW Version: 19.3.2369 (Mar 2019)
« Reply #59 on: March 20, 2019, 01:33:56 AM »
Since that last update, my Avast Internet Security is down (You are unprotected) and no matter what I try, it says "Loading... This shouldn't take long" (only button available is the exit button). Except it never ends...

I tried to update and repair Avast 3 times by going through the uninstall panel, but nothing will do.

What can I do?